BMW 7 Series Sedan G70 ICE 740i M sports package, Frozen Deep gray metallic, 21" M light alloy wheels Star-spoke style 908 top view from rear

THE NEW 7

THE ALL-NEW BMW 7 SERIES SEDAN: ENGINES & TECHNICAL DATA.

THE NEW 7THE ALL-NEW BMW 7 SERIES SEDAN: ENGINES & TECHNICAL DATA.

The key facts and figures for the new BMW 7 Series Sedan at a glance:

  • Engines, consumption and CO2 emissions
  • Performance data such as displacement, hp, Nm and acceleration
  • Weight, dimensions, wheel and tyre sizes
Read more

⁽¹⁾ Values are preliminary
⁽²⁾ The purely electric drive is only available at temperatures below 0 degrees Celsius after a few kilometres, when the battery has warmed up to the operable state
⁽³⁾ Consists of internal combustion engine drive (stated nominal value) and electric drive (up to stated nominal value)
⁽⁴⁾ Power depends on the state of charge of the battery

Read more

THE NEW BMW 7 SERIES SEDAN: TECHNICAL DATA.

Select model

Weight

Unladen weight EU in kg 2,150
Max. permissible weight in kg 2,785
Permitted load in kg 710
Permitted axle load front/rear in kg 1,325/1,510
Luggage capacity min. (seats up) in l 540
Trailer load (unbraked) in kg -
Trailer load 8% (braked) in kg -
Trailer load 12% (braked) in kg -

Engine

Cylinders/valves 6/4
Capacity in ccm 2.998
Stroke/bore in mm 94.6/82.0
Nominal power in kW (hp) at 1/min 200 (272)/5.000-6.500
Nominal torque (Nm) at 1/min 400/1.600-4.500
Compression ratio : 1 11.0

Performance

Acceleration 0–100 km/h in s 6.9
Top speed in km/h 250
Electrical engine top speed in km/h -

Fuel consumption

Fuel consumption, combined in l/100 km 7.9
CO2 emissions, combined in g/km 166-182
Energy consumption, combined in kWh/100km (WLTP) -
Tank capacity, approx. in l 74

Wheels

Tyre dimensions front 255/45 R20
Tyre dimensions rear 285/40 R20
Wheel dimensions and material front 9 J x 20 inches, light-alloy
Wheel dimensions and material rear 10.5 J x 20 inches, light-alloy

Range and charging

Electric range, combined in km -
Growth capacity of lithium-ion battery (net/gross) in kWh -
Charging time 7,43,7 kW/16 A, BMW i Wallbox (0–100%) h -

Electric engine

Nominal power in kW (hp) 13 (18)
Nominal torque (Nm) 200

Total vehicle drive

Power kW (PS) 210 (268) (3)
Torque Nm 425 (3)
BMW wheels and tyres EU tyre label close-up

BMW WHEELS & TYRES.

We subject the tyres for our vehicles to stringent tests with up to 50 different quality criteria – significantly more than prescribed by the uniform tyre labelling regulation that applies throughout Europe. This is where you will find all the information on the properties of the tyres used at BMW.

Fuel consumption and CO2 emissions.

BMW 740i (1):
Fuel consumption in l/100 km (combined; WLTP): 8.0–7.0
CO2 emissions in g/km (combined, WLTP): 183–159

BMW 750e xDrive (1):
Fuel consumption in l/100 km (combined; WLTP): 1.2–1.0
CO2 emissions in g/km (combined, WLTP): 28–22

(1) The purely electric drive is only available at temperatures below 0 degrees Celsius after a few kilometres, when the battery has warmed up to the operable state
(2) Consists of internal combustion engine drive (stated nominal value) and electric drive (up to stated nominal value)
(3) Power depends on the state of charge of the battery


Official figures for fuel consumption, CO2 emissions, electricity consumption and electric range were determined in accordance with the prescribed measurement procedure and comply with Regulation (EU) 715/2007 as amended. WLTP figures take into account any optional equipment in the case of ranges. For vehicles newly type-approved since 01.01.2021, the official specifications exist only according to WLTP. Further information on the NEDC and WLTP measurement methods can be found at www.bmw.de/wltp

Read more

Fuel consumption and CO2 emissions.

  • BMW 735i Sedan:
    Fuel consumption in l/100 km (combined): 8.2
    CO2 emissions in g/km (combined): 186

    The values of fuel consumptions, CO2 emissions and energy consumptions shown were determined according to the European Regulation (EC) 715/2007 in the version applicable at the time of type approval. The figures refer to a vehicle with basic configuration in Germany and the range shown considers optional equipment and the different size of wheels and tires available on the selected model.


    The CO2 efficiency specifications are determined according to Directive 1999/94/EC and the European Regulation in its current version applicable. The values shown are based on the fuel consumption, CO2 values and energy consumptions according to the NEDC cycle for the classification.

    All technical data are indicative only and varies as per market and configuration. For more information, please check with your local dealer for all fuel consumption and CO2 emissions.